Alto Q Manual do Utilizador descarregar pdf (Página 12)

5.2. Delay Menu

Use this menu to work on the systems delay lines.

In these pages, the number of the parameters and how they are presented varies according

to the configuration of the PRESET and according to settings (Units UTLITY menu). In fact, these pages only show

the parameters that can actually be used, in the most suitable form of editing.

Parameters

Input Delay

Delays the signal of an input (or the sum of the inputs) before sending it to the processor.EQ

In this way, all the outputs which depend on that input are delayed by the same length of time. Also called Master

Input Delay is mainly used to compensate for the effectsDelay, due to the distance between the various

speaker enclosures or between various blocks of a complex sound system (for example in large concert halls,

INA DELAY

INB DELAY

Parameters

DELAY

Parameters

stadiums, etc.), Thus achieving virtual alignment.

Press The page appears, by means of which it s possible to edit the name of theENTER. PRESET Naming

PRESET to be saved.

The name of the 'start' PRESET (i.e. of the PRESET currently loaded) is proposed as default. The cursor takes up

position on the first of the twelve character spaces available.

Pr es

If you want to abort procedure (for example because you've chosen the wrong memory area) andNaming

At this point:

If you decide to accept and confirm the name suggested, press ENTER.

return to Store PRESET procedure, press .ESC

If you want to assign a new name to the PRESET you're storing:

- use the and keys to position the cursor on the required character

- use to enter the alphanumeric value wantedDIAL

- after finishing, press ENTER.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 24 25

Sem comentários

Alto Q Manual do Utilizador Página 12