Alto CONTROL30 Manual do Utilizador descarregar pdf (Página 29)

Control Change (Max. Frequency of Changes: 120 BPM)

MIDI commands will be executed from control30 only, if the status of the device is on the "Top Ring" or utility

menu and if the MIDI channel is set properly.

1. System executes MIDI commands also when in bypass.

2. Control 0 00 (Bank Set)

Possible values are 0, 1,...,5. Given cases:

a. G2 15M, P2x15M

Bank = 0, 2, 4 selects channel 2 (Right) and bank = 0, 1, 2

Bank = 1, 3, 5 selects channel 1 (Left) and bank = 0, 1, 2

b. G2 15S, P2 15S

Bank = 0, 2, 4 selects channel1&2(Left & Right) and bank = 0,1,2

Bank = 1, 3, 5 selects channel1&2(Left & Right) and bank = 0,1,2

c. G1 30, P1 30

Bank = 0, 2, 4 selects channel 2 (Right) and bank = 0, 1, 2 of EQ parametric filters 1,...,15

Bank = 1, 3, 5 selects channel 2 (Right) and bank = 0, 1, 2 of EQ parametric filters 16,...,30

3. Control 0 03 (Select Eq type) (Min. Time Between Changes: 6 seconds )

Possible values are 0, 1,...,5. Given cases:

a.G2 15M=0,P2 15M=1,G2 15S=2,P2 15S=3,G1 30=4,P1 30=5

Each change of Eq type the system loads a default preset for the EQ type.

4. Control 0 07 (Volume)

Possible values are 0, 1,...,54 corresponding to -15dB, -14.5dB,...,+12dB (step = 0.5dB)

5. Control 0 0E (Delay Adj)

Possible values are 0, 1,...,127 corresponding to 0ms, 4ms,...,508ms (step = 4ms)

6. Control 0 0F ( Delay Fine)

Possible values are 0, 1,...,95 corresponding to 0us, 21us,...,1998us (step = 21us)

7. Control 0 10 (Equalizer/Bypass)

Possible values are 0 and 1 corresponding to Equalizer = 0, Bypass = 1. Passing from Equalizer -> bypass

8. Control 0 11 (Filter Gain/Freq/Q)

9. Control 0 12 ( Filter Gain/Freq/Q)

10. Control 0 13 ( Filter Gain/Freq/Q)

11. Control 0 14 ( Filter Gain/Freq/Q)

12. Control 0 15 ( Filter Gain/Freq/Q)

13. Control 0 16 ( Filter Gain/Freq/Q)

14. Control 0 17 ( Filter Gain/Freq/Q)

15. Control 0 18 ( Filter Gain/Freq/Q)

16. Control 0 19 ( Filter Gain/Freq/Q)

17. Control 0 1A (Filter Gain/Freq/Q)

18. Control 0 1B (Filter Gain/Freq/Q)

19. Control 0 1C (Filter Gain/Freq/Q)

20. Control 0 1D (Filter Gain/Freq/Q)

21. Control 0 1E (Filter Gain/Freq/Q)

22. Control 0 1F (Filter Gain/Freq/Q)

a. G2 15M

Bank = 0, 2, 4 selects Gain, possible values are 0, 60; -15, +15dB step = 0.5dB Channel 2

Bank = 1, 3, 5 selects Gain, possible values are 0, 60; -15, +15dB step = 0.5dB Channel 1

1 2 ... 24 25 26 27 28 29 30 31 32 33

Comentários a estes Manuais

Sem comentários

Alto CONTROL30 Manual do Utilizador Página 29

Comentários a estes Manuais

Manuais e produtos relacionados com Equalizadores Alto CONTROL30