Alto CONTROL30 Manual do Utilizador descarregar pdf (Página 9)

Select the memory location (Empty or already occupied from a previous user's preset) where to store the

new user's preset using buttons.UP/DOWN

Equ Setup

This function allows the user to select the type of EQ to be used:

Graphical 2x15 Dual Mono (15 filters per channel)

This is a graphical EQ (fixed Q and frequencies) with independent settings for each channel. When this type

of EQ is selected, only a channel a time can be edited. To select the channel to be edited, click the keyEDIT

and select Channel item.

Parametric 2x15 Dual Mono (15 filters per channel)

This is a parametric EQ (variable Q and frequencies) with independent settings for each channel. When this

type of EQ is selected, only a channel a time can be edited. To select the channel to be edited, click the EDIT

key and select Channel item.

Graphical 2x15 Stereo (15 filters per channel)

This is a graphical EQ (fixed Q and frequencies) in which both channels share the same settings. When this

type of EQ is selected, both channels are simultaneously edited. If the key is pressed and Channel itemEDIT

is selected, the parameter shows LNK (linked) and cannot be changed.

Parametric 2x15 Stereo (15 filters per channel)

This is a parametric EQ (variable Q and frequencies) in which both channels share the same settings. When

this type of EQ is selected, both channels are simultaneously edited. If the key is pressed and ChannelEDIT

item is selected, the parameter shows LNK (linked) and cannot be changed.

Graphical 1x30 Mono (30 filters / one channel)

This is a graphical EQ (fixed Q and frequencies) with 30 filters on one channel. When this type of EQ is selected,

only a channel works and can be edited. If the key is pressed and Channel item is selected, the parameterEDIT

shows LNK (linked) and cannot be changed.

Parametric 1x30 Mono (30 filters / one channel)

This is a parametric EQ (variable Q and frequencies) with 30 filters on one channel. When this type of EQ is

selected, only a channel works and can be edited. If the key is pressed and Channel item is selected, theEDIT

parameter shows LNK (linked) and cannot be changed.

Once terminated the sequence above, on the display will appear the name of the selected preset and the sys-

tem will go back to the main menu.

Store Preset: This function allows the storing on one of the 60 available memory locations the modified (using

the Editing Menu) user's preset, starting from one of the 64 available factory presets.

To Store a Preset:

Select "Store Preset" using buttons.UP/DOWN

Press button to access the further sub menu.ENTER

To Load a Preset:

Select "Load Preset" using buttons.UP/DOWN

Press button to access the further sub-menu.ENTER

Select the chosen preset using buttons.UP/DOWN

Press to load the preset or press button if you decide not to load the preset.ENTER ESC

If you want to give up, press to go back to the main menu without storing the new preset, otherwise,ESC

press to store the new preset. The user can choose the identification name for the new presetENTER

using 6 characters max. The blinking character will be modified using the buttons. When choosingUP/DOWN

the character, press to confirm and go to the next one. PressingENTER ESC

before the 6 character, the

old name will be maintained as name of the new preset. Pressing ENTER as confirmation of the 6 character,

the new preset will be stored with the new name. There is no possibility to correct a confirmed character, if

necessary to change again the name, repeat the storing process from the beginning.

Once terminated the sequence above, on the display will appear the name of the new stored preset and the

system will go back to the main menu.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 32 33

Comentários a estes Manuais

Sem comentários

Alto CONTROL30 Manual do Utilizador Página 9

Comentários a estes Manuais

Manuais e produtos relacionados com Equalizadores Alto CONTROL30